coffee-for-less-blog
Save Time and Money with These Keurig K-Cup Brewer Solutions
Having problems with your Keurig K-Cup Brewer? Repeated usage can cause functional issues, which will impact the brew quality of your Keurig K-Cup Pods and ultimately your coffee drinking experience. The good news is there are a number of ways to fix these problems and get your machine to function as good as new. Here are five common Keurig troubleshooting solutions and easy ways to correct these problems.
Common Problem 1: K-Cup Coffee and Tea Grounds Get into Your K-Cup Holder and Causes a Water Line Clog
Keurig Troubleshooting Solution: Remove or clean the needle that punctures the K-Cup Pod then do a small cup cleansing brew to clean out any residual. This will ensure any left-over debris is flushed out before you have you start your next brew.
Common Problem 2: K-Cup Brewer Shuts Off Unexpectedly Between Brews
Keurig Troubleshooting Solution: Remove the water reservoir and insert it back into place. The magnet in the reservoir can become dislodged during brewing from the vibrations in the machine.
Common Problem 3: Not Ready Message on Your Keurig Machine Stays On
Keurig Troubleshooting Solution:
- Turn off your machine and unplug it
- Detach the water reservoir
- Wait 5 seconds then repeat the steps 1 and 2
- Insert the water reservoir then press the menu button and when the “Not Ready” message appears lower handle
Common Problem 4: Blinking Blue Light in Water Reservoir
Keurig Troubleshooting Solution: Simply add more water to the reservoir. All K Cup Coffee Maker models need a minimum amount of water to activate the brewing process, so if you’re reservoir is low the machine will not start.
Common Problem 5: Installing Your Water Filter
Keurig Troubleshooting Solution: This problem applies to only the models with the water filter feature. If you own one of these models, you can install the filter in three simple steps:
- Soak the entire filter in cold water for five seconds
- Place the filter at the bottom of the Water Handle Assembly
- Set the timing dial two months from the day to ensure it is replaced at the appropriate time
Use these five Keurig troubleshooting solutions for your machine and you’ll ensure your coffee and tea always taste great and your brewer lasts a long time. As a result, you’ll save yourself time and money not having to replace your Keurig K-Cup Brewer.
Turn on water will not stop running. Really want my cuppa coffee and drained I refilled it and is doing the same thing what do I do now I am plugged it I turned it off turned it on their good thing I’m watching it or I have water all over my countertop this unit is only 3 or 4 months old and I got it from Costco
i have a 2.0 and having trouble with clear water pouring out at bottom when i brew a cup. i have run all the cleaning methods and the orange brewer maintenance accessory will not stay in the holder it pops out will not stay in. What is wrong?
coffee maker stays on all cup lights on . but not flashing try pushing button nothing happens unplug waited 1min plug in still the same way
I was descaling my machine with a full reservoir of water and solution, when after running the solution through and started running a fresh water reservoir through when it stopped. I heard a couple beeps, but no light comes on. I unplugged it let it sit for a few minutes and took the reservoir off for 20 seconds and it still does not show any kind of light.
I was descaling my machine with a full reservoir of water and solution, when after running the solution through and started running a fresh water reservoir through when it stopped. I heard a couple beeps, but no light comes on. I unplugged it let it sit for a few minutes and took the reservoir off for 20 seconds and it still does not show any kind of light.